It is possible to have a badass ATV with the best features and specifications and not be satisfied with how it looks. Getting an ATV with the perfect color matching your taste may be difficult, so what do you do? You can repaint your ATV plastic.
The best alternative to changing the paint or design of your ATV is to paint it. Painting an ATV plastic involves three steps: first, get rid of the old paint, apply an adhesive, and apply the new paint. It is not as easy as it looks, and you need to understand all the steps.
You should not encounter any difficulty when you are painting your ATV. It should be a fun and interesting activity. Nevertheless, you must follow the steps to get your desired outcome. Hop in, let us learn how to paint ATV plastic.
How To Paint ATV Plastic
As long as you know what to do and how to go about it, painting ATV plastic will be as effortless as possible. However, before you paint the ATV plastic, you need to have all the tools and equipment you need. Some of the tools you would need include:
- A scuff pad
- Plastic cleaners
- A primer
- Finishing glaze
- A bumper sealer
- The paint.
Once you have the tools prepared, you can start the process of painting the ATV. These are the steps you need to take to paint your ATV plastic.
Clean The ATV Plastic
The first thing you need to do is to clean the ATV thoroughly. You can clean the plastic with a soft cloth and water or with warm soapy water. Cleaning the plastic gets rid of all dust and dirt that could hamper the paint coat. If you skip this step, you will have a bad painting at the end because there will be specks of dirt underneath the paintwork. This will make your painting unattractive.
Sand Down The ATV Plastic
You need to sand the plastic with 180 or 200 grit sandpaper. There is a thin layer of coating on the plastic, and it is caused by constant exposure to natural elements like the wind and sunlight for a long time. When sanding the plastic, be careful not to press it too hard, or you can create wells in the plastics. You need to be firm but also gentle.
Get Rid Of Water Soluble Contaminants
After sanding the plastic, the next step is to remove all water-soluble contaminants from the plastic surface. You can use a scuff pad and any solution to get rid of the contaminants. You can use products like a surface cleaner and degreaser to wipe it clean. Spray it on the plastic and leave it for some minutes. It will remove both sandpaper dust and contaminants from the plastic.
Repeat The Sanding Process
This is an optional process, so you can skip it if you want to. However, it will not hurt to sand the plastic again. It will remove the coating you missed the first time. Taking precautions is better than regretting. So, it is advisable to sand the ATV plastic once more.
Sandblast The ATV Plastic
Sandblasting the ATV plastic is another important step in painting the plastic. Ensure you cover the entire plastic surface that you will paint. You can use 80 grit aluminum oxide in the sandblaster. If you do not want to sandblast or do not have a sandblaster, you can sand the plastic with 400 grit sandpaper. A sandblaster is the best option, but you can do the best with what you have if that option is not available.
Repeat The Cleaning Process
This is the final cleaning process; use a plastic cleaner to complete the process. It is best to research the best brands of plastic cleaners and use one of them. Most plastic cleaners are available as sprays. Spray a heavy coat on the plastic surface, leave it for some minutes so all the solvents can dissolve the contaminants. After about twenty minutes, you can wipe it off with a clean paper towel.
Adhesives help make the paint stick for a long time, prevent cracking and chipping later, and you would not have to repaint it. You can use any industrial level adhesives, but you must apply two coats of it. After applying the first coat of adhesive, ensure it has dried before applying the second coat.
Apply A Primer
Before you apply the paint on the ATV plastic, you want to layer and texture the surface properly. A primer will get the job done. You need to make sure the adhesive is dry before you apply the primer. You can use a waterborne primer surface to cover the surface completely. The primer will fill in the imperfections, like scratches, and make your ATV look new.
Sand The Surface Again
To get the perfect finish, you must put in the extra effort. You need to sand the entire ATV plastic surface with 320 grit sandpaper till it is smooth. The 320 grit sandpaper will achieve that desire. You should sand the surface only after the primer is dry.
Apply A Finishing Glaze
At this point, you need to cover up every imperfection resulting from the cleaning or that was not covered up previously. Check for the best finishing glaze that will completely cover up the spots. Ensure the finishing glaze you use has a low viscosity. These types have a smooth flow.
Sand For The Last
Use sandpaper to smoothen out the surface after the finishing glaze has dried. The tiniest undulations will be noticed after you paint. This is the major reason you need to sand the surface well. With a smooth surface, your paint will look beautiful and last longer.
Apply A Bumper Sealer
This is the final step before you paint the ATV. You need to apply a waterborne bumper sealer to the plastic that you will paint. After the bumper sealer is dry, you can start painting the ATV plastic.
Paint The ATV Plastic
Start spraying from the bottom up, so you do not make the top look grainy. Spray lightly so the paint does not run down. There are different pains for ATV plastic you can choose from. Apply the first layer on the surface and after it is dry, apply another layer. After the second layer is dry, apply flex additive so there will be better adhesion between the plastic and paint. Let it dry off.
Best Spray Paints For Atv Plastic
Now that you know and understand the process of painting your ATV plastic, you need to know the best paints to use. We have compiled a list of some of the best ATV plastic spray paints.
Autotek AT00BTB500 is produced with top-notch quality and will give your ATV a glossy finish. When you use this paint, you save the money and time you would have used to repaint the plastic regularly. The paint can withstand different weather conditions and is long-lasting.
One of the best ATV paints you can find is the Rust-Oleum 276116, and it has a bright, vibrant color. If you want to use this paint for your ATV plastic, you do not need a primer, so you can skip it. It comes with a gloss finish that glares and elegant colors that last for a long time.
Colorbond 258 BMW
One of the ideal paints for ATVs, and it is the perfect choice for ATV plastics. However, it would be best to clean, sand, and primer the plastic well before applying the paint. The Colorbond 258 BMW dries within ten minutes, is non-water soluble, and long-lasting.
The thought of owning an ATV with an undesirable color should not weigh you down; you can consider repainting it. Finding an ATV with an attractive color can be difficult. Rather than get discouraged, you can repaint it to the color of your choice.
Although the process can be time-consuming, the result will be beyond your expectations. Like the saying goes, no pain, no gain. Endure the process, and you have a beautiful ATV.
Shawn Manaher loves to play with new toys and dive into new hobbies. As a serial entrepreneur, work definitely comes first but there is always room for hobbies.